Once the user is satisfied that the Puller Shaft is.

Jan 06, this is the removal only. be sure to watch part 2 on how to install the starter bushing. i include all the easy tools to use to install it with ease. Jan 31, Starter Bushings become worn out-of-round over time, causing the Starter Shaft to wobble and the Armature to drag inside the Starter Housing. Volkswagen air-cooled engine Starters (with the exception of the AutoStick Starters) have no front Bushings–they depend upon a Bushing which is installed in the Transaxle.

When a Starter is removed from the Transaxle, the Bushing location is revealed. A receiving orifice holds the Bushing. The Bushing. To remove the old 12 Volt Starter Bushing, tap the old Bushing using a 7/16ths tap. If the Bushing will not remove by pulling on the threaded tap, install a long bolt of the same threads, place vise grips at the bolt head and use a hammer to tap on the nether side of the vise grips.

If the Bushing will not remove by pulling on the threaded tap, install a long bolt of the same threads, place vise grips at the bolt head and use a hammer to tap on the nether side of the vise grips.

This should loosen and remove the treeclearing.barted Reading Time: 1 min. Jan 28, Quick video to help people with starter bush removal on a vw beetle Quick video to help people with starter bush removal on a vw beetle The best way I have found is to use a small flat blade screwdriver to break the bronze bushing apart, but becareful of the bellhousing.

The bronze bushing will break apart pretty easy. Of course, VW makes a tool to remove it, which is about impossible to find. Mar bottle tree cuttings, I try changing the starter bushing and swapping some more starter parts in the attempt to get my VW to start.

This evidently wasn't the problem.(The real pro.