Saddles Seat clamps.
These tool set is time saver to remove worn shift shaft bushing with no the inner primary removing need, swapped out the bushing in approximately 20 minutes.(Also help install the new bushing) Pretty easy and quick work to do with this tool if you need remove and install your own bushings/5(15). Time-saving tool removes worn shift shaft bushings in Big Twin primaries without having to remove the inner primary.
Tool also will install new bushings to the correct location. Bushings can be swapped out in approximately 20 minutes using this toola huge time /5(47).
Use a pedal to act as an installation tool (figure 7). Apply a strong thread locker to outside of bushing. Apply a strong thread locker to outside of bushing.
Figure 7. Apply a thread locker to the outer threads of the bushing. Thread bushing into arm (figure 8). Remove pedal from bushing immediately and fine tune bushing positioning.
Figure 8. Aug 21, Turn pedal wrench counter-clockwise to remove right pedal or turn crank so the pedal is pedaling forward. Use care not to abrade skin. Continue to turn wrench counter-clockwise and remove pedal completely from crank. Rotate bike as necessary until left pedal is easily accessed. Pedal removal should be the most technically simple repair or bike maintenance procedure. If pedals are installed correctly, with lubricant, and the bike stored away from continual exposure to moisture a simple 15mm wrench is all you treeclearing.barted Reading Time: 9 mins.
Mar 04, This tool will help you remove your worn out bushings. The way it works is you align in on top of the wheel with bushings on center. Using a hydraulic shop p.