By using this service, some information may be shared with YouTube.

Nov 30, The easiest choice is to fell the tree in the direction it would naturally fall due to slope, overhang and wind direction.

You should never stand or walk in front or behind a falling tree.

Felling in another direction requires a special technique, more effort, and is sometimes just impossible. In the following video, you can learn proper methods for creating different notches and techniques for maintaining a correct hinge so that you will fell a tree safely and comfortably. Nov 27, When felling a tree, always start by making a directional notch (also known as a face cut) on the side of the tree where you want it to fall.

This allows you to control the direction of the fall – essential to avoiding accidents and injury to you and anyone treeclearing.barted Reading Time: 6 mins. How to Fell a Tree in the Desired Direction Safety First.

Before you start cutting the notches to fell a tree, you need to carefully examine its surroundings and Draw a Line on the Trunk. The basic felling procedure is to cut a notch on the side of the tree toward the direction you Making the.

the tree from the back side with a cut below the bore cut. Hinge wood of sufficient length and width is required to control the tree when falling. The bore (back) cut must be made at the same level as the notch to increase hinge strength. In many instances, this technique is con-sidered the safest method to fell trees. PROPER BACK CUTTING. Sep 01, While standing away from the tree, at a position 90 degrees to the direction of fall, sight up to the top of the tree using a weighted string or an axe as a plumb and note the location on the ground.

The back lean is the distance from this point along the intended direction of fall to the apex of the planned undercut. Mar 01, You can control the direction your tree falls by cutting your first notch on the side of the tree that faces the direction you want the tree to fall. Use common sense when planning where you want your tree to fall. Avoid felling a tree onto your car, Estimated Reading Time: 6 mins. Dec 09, Using a Chainsaw 1.

Kevlar chaps will protect your legs from chainsaw grazes.

Cut on a notch at a degree angle. Decide the direction that you want the tree to fall because this is the side of 2. Make a horizontal cut ⅓ through the tree. Use the chainsaw and make a clean, horizontal cut at the base of the %(6). I think the fall direction is random chagrin falls tree lighting ceremony you could maybe put walls around 3 sides to guide it.

Also, you can easily push the logs around so you might be able to position them that way. Width Of Holding Wood –Tree Hinged To The Stump While Falling – Controls The Direction And Fall Of The Tree – Without Holding Wood The Tree Is Unguided During The Fall Holding Wood Severed When The Two Face Cuts Meet – Face Should Not Close Until The Tree Fully Committed To The Fall Falling In The Desired Direction.